Filter Vessels

WW Tank & Vessel manufactures quality filtration equipment for the oilfield and petrochemical industries. We are able to meet our customers needs and  provide complete design and engineering services in filtration and pressure vessels. WW offers ASME housings to accept all commercially available filter cartridges. Our complete engineering and CAD departments, along with our fabrication capabilities allow us to satisfy the most difficult design requirements with a minimum of hassles or delays.

Click on Vessel Type below for more information

Call 1-806-433-8687 to speak to

our Filter Vessel specialist!

PSE Series Filter Vessels

 

WW Tank & Vessel ‘PSE’ series vessel are designed to use 10”, 20”, 30” and 40” filter cartridges. These vessels are capable of providing flow rates to 1575gpm. The pressure rating for the ‘PSE’ Series is up to 1440psig. Larger vessels available. The ‘PSE’ series vessels will accommodate a wide variety of 2 1/2” diameter cartridges including: string wound, resin impregnated, and pleated paper.

 

All WW ‘PSE’ series vessels are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional. All ‘PSE’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

Standard Features:

Design: ASME Section VIII, Div. 1
Design Pressure: 300 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: 304 Stainless Steel
   O-Ring: 304 ss
Inlet & Outlet: 300# RF Flange
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical 18” through 24”, Hydraulic 30” and larger

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only)
   Internals: 316 Stainless, Brass
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: FNPT connections, Flanges
High Pressure Ratings: Higher pressure ratings are available upon request.

*A trademark of E.I. Dupont de Nemoures Co.

PSE Series Dims

‘718S’ Series Filter Vessels

WW ‘718 S’ series vessels are designed to use 7” x 18” filter cartridges. These vessels are capable of providing flow rates to 1800 gpm.

 

All ‘718 S’ series vessels are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional. All ‘718 S’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig – 1440 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: 304 Stainless Steel
   O-Ring: Buna ‘N’
Inlet & Outlet: 150# RF Flange
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical 20” through 28”, Hydraulic 36” and larger

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only)
   Internals: 316 Stainless, Brass
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: FNPT connections
High Pressure Ratings: Higher pressure ratings are available upon request.

The ‘718 S’ series vessels will accommodate a wide variety of 7” x 18” and 736 cartridges.

*A trademark of E.I. Dupont de Nemoures Co.

718 Series Dims
 

336S Series Filter Vessels

 

WW ‘336 S’ series vessels are designed to use 3”OD x36” filter cartridges. These vessels are capable of providing flow rates to 800 gpm.

All ‘336 S’ series vessels are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional. All ‘336 S’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig – 1140 PSIG
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: Carbon Steel
   O-Ring: Buna 'N'
Inlet & Outlet: 150# RF Flange
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical 18” through 24”, Hydraulic 30” and larger

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only), 304 or 316 ss (complete)
   Internals: 304 or 316 Stainless
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: FNPT connections
High Pressure Ratings: Higher pressure ratings are available upon request.


The ‘336 S’ series vessels will accommodate a wide variety of 336 cartridges including: string wound, resin impregnated, and pleated paper.

*A trademark of E.I. Dupont de Nemoures Co.

336S

ACME Threaded Series Filter Vessels

 

WW ‘ACME’ series vessels are designed for high pressure applications using wide variety of filter cartridges. These vessels are capable of providing flow rates to 1800 gpm. The pressure rating for theACME Series is up to 3000 psig.

 

The ACME series vessels are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional. All ‘MTE’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: Up to 3000 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: Carbon Steel
   O-Ring: Buna 'N'
Inlet & Outlet: Flange rated for pressure
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only), 304 or 316 ss (complete)
   Internals: 304 or 316 Stainless
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
High Pressure Ratings: Higher pressure ratings are available upon request.

The ACME series vessels will accommodate a wide variety of cartridges including: string wound, resin impregnated, and pleated paper.

*A trademark of E.I. Dupont de Nemoures Co.

MTE Series Vessel
 

S Series Filter Vessels

WW ‘S’ Series vessels are designed to use 10”, 20” and 30” filter cartridges. These vessels are capable of providing flow rates to 1575 gpm. The pressure rating for the ‘S’ series is 150 psig.

 

The ‘S’ series vessels are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional. All ‘S’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
Vessel: Carbon Steel Internals: 304ss
O-Ring: Buna ‘N’
Inlet & Outlet: 150# RF Flange
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical 18” through 24”, Hydraulic 30” and larger

OPTIONAL FEATURES:

Materials of Construction
Vessel: 304 or 316 SS (wetted parts only)
304 or 316 SS (complete)
Internals: 316 SS, brass
O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: FNPT connections

High Pressure Ratings: Higher pressure ratings are available upon request.

The ‘S’ series vessels will accommodate a wide variety of 2 1/2” diameter cartridges including:
string wound, resin impregnated, and pleated paper.

*A trademark of E.I. Dupont de Nemoures Co.

 

S Series Bag Filter Vessels

WW "S' Series Bag Filters are designed to use No. 2 size, 7 x 32 bags. These vessels are capable of providing flow rates up to 3600 gpm.

 

All bag filters are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig up to 1440 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: 304 SS
   O-Ring: Buna 'N'
Inlet & Outlet: 150# RF Flange
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical 18” through 24”, Hydraulic 30” and larger

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only), 304 or 316 ss (complete)
   Internals: 316 Stainless, Brass
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
High Pressure Ratings: Higher pressure ratings are available upon request.

The ‘S’ series vessels will accommodate a wide variety of No. 2 size, 7 x 32 bags.

*A trademark of E.I. Dupont de Nemoures Co.

S Series Bag Filter
 

644S Series Filter Vessels

WW ‘644 S’ series vessels are designed to use 6” x 44” filter cartridges. These vessels are capable of providing flow rates to 1800+ gpm.

 

The ‘644 S’ series vessels are designed in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1; with the ‘U’ stamp optional. All ‘644 S’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig up to 1440 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: Carbon Steel
   O-Ring: Buna 'N'
Inlet & Outlet: RF Flange
Exterior Finish: Sand blast & shop enamel
Cover Lift: Mechanical 20” through 28”, Hydraulic 36” and large

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only), 304 or 316 ss (complete)
   Internals: 304 or 316 Stainless
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: FNPT connections
High Pressure Ratings: Higher pressure ratings are available upon request.


The vessels will accommodate a wide variety of 6” x 44” cartridges.

*A trademark of E.I. Dupont de Nemoures Co.

644S Series
 

718CV Series Filter Vessels

WW  ‘718 CV’ series vessels are designed to use 7 x 18 filter cartridges. These vessels are capable of providing flow rates to 1800 gpm.

The ‘718 CV’ series vessels are a NON-Code design. All ‘718 CV’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: Carbon Steel
   O-Ring: Buna 'N'
Inlet & Outlet: 3000# THD. Coupling
Exterior Finish: Sand blast & shop enamel

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only), 304 or 316 ss (complete)
   Internals: 304 or 316 Stainless
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: Flange connections
Cover Lift: Mechanical 16” and 18”
High Pressure Ratings: Higher pressure ratings are available upon request.


The ‘CV’ series vessels will accommodate a wide variety of 7 x 18 cartridges.

*A trademark of E.I. Dupont de Nemoures Co.

 

718PSL Series Filter Vessels

WW  ‘718 PSL’ series vessels are designed to use 7 X 18 filter cartridges. These vessels are capable of providing flow rates to 1800 gpm. The pressure rating for the ‘718 PSL’ series is 150 psig.

 

The ‘718 PSL’ series vessels are designed in accordance with the ASME CODE design. All ‘718 PSL’ series vessels feature inlet and outlet inline for ease of installation in existing lines.

 

STANDARD FEATURES:

Design: ASME Section VIII, Div. 1
Design Pressure: 150 psig
Design Temperature: Up to 450 degrees F
Materials of Construction
   Vessel: Carbon Steel
   Internals: Carbon Steel
   O-Ring: Buna 'N'
Inlet & Outlet: 150# RF Flange
Exterior Finish: Sand blast & shop enamel

OPTIONAL FEATURES:

Materials of Construction
   Vessel: 304 or 316 ss (wetted parts only), 304 or 316 ss (complete)
   Internals: 304 or 316 Stainless
   O-Ring: Viton*, Teflon* encapsulated silicone, neoprene, others on special request
Exterior Finish: Special coatings on request
Interior Finish: Coal tar epoxy
Pressure Gauges: Direct reading differential
Inlet & Outlet: Flange connections
Cover Lift: Mechanical 16” and 18”
High Pressure Ratings: Higher pressure ratings are available upon request.

The ‘PSL’ series vessels will accommodate a wide variety of 7 X 18 cartridges.

*A trademark of E.I. Dupont de Nemoures Co.

718PSL
 

Single Element Filter Vessels

Models 100/200/300 Carbon Steel & Stainless Steel Single Element Filters

Standard Features:

• 10″ (Model 100), 20″ (Model 200), and 30″ (Model 300) Cartridge Models
• 2000 P.S.I. Working Pressure
• 5000P.S.I. hammer union models available
• Gases or Fluids Filtration
• Glycol and Amine usage
• 1” FNPT Connections
• Epoxy coating available
• Stainless Steel models available
• The current models cannot be ASME code certified per ASME rules.

ASME Code style coming soon!

© 2020 by WW Tank - Pampa, TX

Follow us on Facebook & Instagram
  • Facebook
  • Instagram
PSE Dims.jpg